Sunday, September 1, 2019

Case Study Report: Odi

Case Study Report: Optical Distortion, Inc. (A) For the three types of chicken farms, the appealing and unappealing characteristics of using ODI contact lens are presented as below. When it comes to appealing characteristics, the three types of chicken farms are the same: less cannibalism, less feed cost, and less the temporary weight loss and the retardation of egg production. From the perspective of cannibalism, which is originally 25% showed in experience, flock mortality is reduced to an average of 4. 5% when ODI lens are used .On the contrary, the debeaking makes the mortality for cannibalism from 25% to only 9% , which is higher than contact lenses used. In other words, farmers can save more 4. 5% (9% minus 4. 5%) chickens in their farm. On the other words, farmers can save $2. 40(price of per hen)*4. 5%*the number of chickens in the farm. From the perspective of less feed cost, the debeaking chicken only can eat the feed in the trough at least 3/8† deep, while the ODI le ns used chicken only can eat the feed in the trough below 3/8†deep.At $158 per ton for chicken feed, this would represent considerable annual savings, especially for large farms. From the perspective of less the temporary weight loss and the retardation of egg production, because the fewer cannibalism and the trauma resulting, farmer can get more eggs. When it comes to unappealing characteristics, the details are as below. Farm Types| Unappealing Characteristics|Small Farms| Labor cost| Lens cost| The number of birds are too small to use the new technology| Medium Farms| Yearly cash flow is only $375,000| The melting point of the hydrophilic polymer is very close to the sterilization temperature| Not reused and the lens cost| Large Farms| Not reused| Lens cost| The melting point of the hydrophilic polymer is very close to the sterilization temperature| As regards geographic areas, ODI should focus its efforts on California. Given the density of large farms n California (flock size of 50,000 or greater), it seems prudent not only to perform the initial product introduction there but to focus the entire first year of business in this single West Coast state. The first year’s planned production volume is approximately 20 million, essentially the same as California’s chicken population. Success in this region could later force farms in other states to implement the lens simply as a means of staying competitive. As regards target segment, it would seem that the focus should be initially on farms with a flock size of 50,000 and over, which means the large farms.Since this would limit the overhead (fixed costs) needed to service these accounts (fewer sales and technical experts required). Also, by focusing on large farms, the sales team could interface with the farms directly, and there would be no need for a â€Å"middle man† to be involved in product distribution. Avoiding this intermediary would help keep costs down. For ODI, pricing con siderations for a pair of lenses are as below. Item| Fixed Cost| Advertising in Trade Publications| $100,000| Headquarters Expenses| $184,000(for volume of 20 million pair)| Regional Office and Warehouse| $196,000|Costs of Molds| $12,000 x 3 = $36,000 (3 molds are needed to produce 21,600,000 pair annually)| Licensing Agreement with New World Plastics| $25,000 (per year, must be paid for first and second year of production)| Item| Variable Cost| per pair of lenses| $0. 032| ODI Cost(per year): TC=FC+MC TOTAL COST=[($100,000 + $184,000 + $196,000 + $36,000 + $25,000)/(50% of 475600000)]+0. 032=$0. 055 (5. 5 cent) per pair Farmers Saving when using ODI lens(per year): Item| Saving| Less Mortality| $2. 40*(9%-4. 5%)=0. 108| Less retardation of egg production| 0. 3/12=0. 044| Less feed cost| (0. 2446-0. 2368)*3/8*($158/2000)*365=0. 084| TOTAL SAVING=$0. 108+$0. 044+$0. 084=$0. 236(23. 6cent) The minimum price that ODI considered is 8 cent per pair, so the price stage is from 8 cent to 2 3. 6 cent, and the ODI should adopt the price policy on entry which is set the price near 23. 6 cent per pair. For the realistic goal for ODI by 1978 is the 50 percent penetration of such farms, when means ODI wants to reach the 50 percent of 470. 8 million pairs, that is, 235. 4 million pairs of lens be sold and used in the farms. Case Study Report: Odi Case Study Report: Optical Distortion, Inc. (A) For the three types of chicken farms, the appealing and unappealing characteristics of using ODI contact lens are presented as below. When it comes to appealing characteristics, the three types of chicken farms are the same: less cannibalism, less feed cost, and less the temporary weight loss and the retardation of egg production. From the perspective of cannibalism, which is originally 25% showed in experience, flock mortality is reduced to an average of 4. 5% when ODI lens are used .On the contrary, the debeaking makes the mortality for cannibalism from 25% to only 9% , which is higher than contact lenses used. In other words, farmers can save more 4. 5% (9% minus 4. 5%) chickens in their farm. On the other words, farmers can save $2. 40(price of per hen)*4. 5%*the number of chickens in the farm. From the perspective of less feed cost, the debeaking chicken only can eat the feed in the trough at least 3/8† deep, while the ODI le ns used chicken only can eat the feed in the trough below 3/8†deep.At $158 per ton for chicken feed, this would represent considerable annual savings, especially for large farms. From the perspective of less the temporary weight loss and the retardation of egg production, because the fewer cannibalism and the trauma resulting, farmer can get more eggs. When it comes to unappealing characteristics, the details are as below. Farm Types| Unappealing Characteristics|Small Farms| Labor cost| Lens cost| The number of birds are too small to use the new technology| Medium Farms| Yearly cash flow is only $375,000| The melting point of the hydrophilic polymer is very close to the sterilization temperature| Not reused and the lens cost| Large Farms| Not reused| Lens cost| The melting point of the hydrophilic polymer is very close to the sterilization temperature| As regards geographic areas, ODI should focus its efforts on California. Given the density of large farms n California (flock size of 50,000 or greater), it seems prudent not only to perform the initial product introduction there but to focus the entire first year of business in this single West Coast state. The first year’s planned production volume is approximately 20 million, essentially the same as California’s chicken population. Success in this region could later force farms in other states to implement the lens simply as a means of staying competitive. As regards target segment, it would seem that the focus should be initially on farms with a flock size of 50,000 and over, which means the large farms.Since this would limit the overhead (fixed costs) needed to service these accounts (fewer sales and technical experts required). Also, by focusing on large farms, the sales team could interface with the farms directly, and there would be no need for a â€Å"middle man† to be involved in product distribution. Avoiding this intermediary would help keep costs down. For ODI, pricing con siderations for a pair of lenses are as below. Item| Fixed Cost| Advertising in Trade Publications| $100,000| Headquarters Expenses| $184,000(for volume of 20 million pair)| Regional Office and Warehouse| $196,000|Costs of Molds| $12,000 x 3 = $36,000 (3 molds are needed to produce 21,600,000 pair annually)| Licensing Agreement with New World Plastics| $25,000 (per year, must be paid for first and second year of production)| Item| Variable Cost| per pair of lenses| $0. 032| ODI Cost(per year): TC=FC+MC TOTAL COST=[($100,000 + $184,000 + $196,000 + $36,000 + $25,000)/(50% of 475600000)]+0. 032=$0. 055 (5. 5 cent) per pair Farmers Saving when using ODI lens(per year): Item| Saving| Less Mortality| $2. 40*(9%-4. 5%)=0. 108| Less retardation of egg production| 0. 3/12=0. 044| Less feed cost| (0. 2446-0. 2368)*3/8*($158/2000)*365=0. 084| TOTAL SAVING=$0. 108+$0. 044+$0. 084=$0. 236(23. 6cent) The minimum price that ODI considered is 8 cent per pair, so the price stage is from 8 cent to 2 3. 6 cent, and the ODI should adopt the price policy on entry which is set the price near 23. 6 cent per pair. For the realistic goal for ODI by 1978 is the 50 percent penetration of such farms, when means ODI wants to reach the 50 percent of 470. 8 million pairs, that is, 235. 4 million pairs of lens be sold and used in the farms.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.